www.advancedco.com
17
2.3.3.2 Door Options
The following door options are available (all diagrams show the rear view of the door). Order the required door
and associated metal parts separately. Mount the door to the back box and secure the hinge using the supplied
M4 Nuts, Plain and Spring Washers supplied.
2.3.3.2.1 Blank Door Option
The utility enclosure can be simply fitted with a blank door to provide secure (key cam lock) access to the
internal modules.
2.3.3.2.2 Zone LED Door Option
Any of the Zone LED option cards can also be fitted to the 6U Utility Module.
Route the ribbon cable from the panel display card
through the lower hole in the left hand side of the panel
module enclosure. Route the cable through the lower
hole in the left hand side of the utility module enclosure
and connect to the input connector (top) of the first LED
module.
Refer to the LED section for further details.
2.3.3.2.3 Switch / LED Door Option
This option comprises of the standard panel module door fitted with a mounting frame to accept up to two Mxp-
538 Switch / LED cards.
Mount the Mxp-538 module on the four fixing studs of the mounting frame.
Fit a blanking plate to the second aperture if unused.
Refer to the data sheet supplied with
the Mxp-538 for full wiring information.
Hinge (Common to all doors)
Affix with the supplied nuts
and washers to the three
studs on the back box.
Hinge
Mxp-538
Positions
Mounting
Frame
Order
separately
Blanking
Plate
Order separately
if required
Summary of Contents for Mx-5101xR
Page 23: ...www advancedco com USER NOTES...
