www.advancedco.com
24
Normal Display
Non-normal Display
Typical Menu Display
SYSTEM NORMAL
22 AUG 2007 16:39:00
[System status]
1 of 1 conditions:
DETECTION ZONE3
OPEN CIRCUIT
[Level 2 Menu]
VIEW
.
TEST
EXTINGUISH MODES
DISABLE/ENABLE
EXIT LEVEL 2
[Release status]
UNAFFECTED
Release Imminent
Release Activated
Release Complete
[Release status]
RELEASE IMMINENT..
-15
RELEASE ACTIVATED
5 Seconds Elapsed
RELEASE ACTIVATED
24 Seconds Elapsed
DISCHARGE COMPLETE
(No Flow Detected)
RESET ALLOWED
The display shows a countdown
timer with the amount of time
remaining before the extinguishant
is released.
3.1.3 Enable Controls
Controls are normally disabled. To access the menus, press the Menu button. The display shows the following:
[CONTROLS DISABLED]
ENABLE CONTROLS
VIEW
LED TEST
Enter Your Password
Enter Your Password
**
Press the
button to select the
‘Enable Controls’ option.
The display prompts for entry of
the password.
Enter the password. As each
number is pressed, an * character
is displayed. Finally, press the
button to confirm.
[Level 2 Menu]
VIEW
.
TEST
EXTINGHUISH MODES
DISABLE/ENABLE
EXIT LEVEL 2
Enter Your Password
Not Recognized!
[Level 2 Menu]
EXTINGHUISH MODES
DISABLE/ENABLE
EXIT LEVEL 2
DATE/ TIME
COMMISSION
.
The display then shows the Level 2
Menu options.
If the password is incorrect (or if
not entered in time) the above
message is shown.
Scroll down to the Commission
Menu
3.1.4 Navigating through menus
When a menu is displayed, use the
buttons to highlight the required menu option and then press the
button to select it.
Press the
‘Esc’
button
from within a menu option to return to the previous menu.
The display will revert to the status mode display after 60 seconds on no activity (15 seconds in a fire alarm
condition). Press the Menu button again to return to the menu option. A programmable timer can be configured
to automatically cancel Level 2 access.
