a d v a n c e d i l l u m i n a t i o n . c o m
P u l s a r 3 2 0 M a n u a l
P u l s a r 3 2 0 M a n u a l
Direct TCP/IP connection from single PC to Pulsar320
PC Setup
You will need to assign a static IP to the host PC
Find your current IP address and whether it is
static
or
dynamic
:
1. Open Windows
Start
menu
2. Select
Run
3. Type:
cmd
and click
OK
4. At the blinking cursor, type:
ipconfig/all
and press
Enter
5. Look for these entries near the end of the list:
-
Dhcp Enabled
. “No” means your IP address is static. “Yes”
means it is dynamic.
-
IP Address
: This is your current IP address.
-
Subnet Mask
. This is the local subnet range.
-
Default Gateway
. Gateway address of any routers or hubs.
42
Appendix D - Figure 24: Windows IP Configuration
