a d v a n c e d i l l u m i n a t i o n . c o m
P u l s a r 3 2 0 M a n u a l
P u l s a r 3 2 0 M a n u a l
PC Application
Uses VB application for user control
PC DLL
Abstracts Pulsar firmware protocol
from VB app.
Available by request
USB compatible
TCP/IP via 10/100Base-T
Firmware
Updates via USB Loader software
Performed by Advanced
illumination, Inc.
High Level Source - ‘C’
Standard User Interface Power switch (Rocker on/off)
Setup Mode: Switched by software
or user interface
Provides Pulses @ 50
Hz Rate (internally
generated) on both
outputs for light head
setup. Light Output
Controlled by
Signatech II.
3 Front panel mounted 3mm LEDs
(Power, Controller Status, Error)
Power - Green
Controller Status -
Amber; Error - Red
Front mounted LEDs
integral to connector
Available by request
(Specifications cont.)
Optional User Interface Includes standard options plus:
Inputs
4 Front panel mounted
momentary switches
Optional Local Control
Provides Complete
Control of Unit
Outputs
Front panel mounted 2 x 16 LCD
External Interfaces
USB
USB Power can be
used to power kernel
and any required
peripherals to perform
programming / config.
/ and perhaps some
calibration
(Electrical)
USB 2.0 Full Speed compatible
(Mechanical)
USB Type B w/Metal Shield
Uses native Microsoft
USB HID driver - Ai will
not have to supply a
USB device driver
(Protocol)
Microsoft HID Compliant
27
(continued next page)
