SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
99
Field Name
Description
SPEED DIAL
section
Speed dial 8 enabled
This feature is
disabled
by default. To
enable
speed dialing, click the
slide button
. Enter the
phone numbers for each digit in the fields below.
Speed Dial 1 -9
(
Appears when the
Speed dial 8 enabled
feature is activated
) Enter the phone number for
each speed dialing option.
LINE CONFIGURATION
section
Rx gain
Select the gain value for received transmissions. Options are
-12
-
0
.
TX gain
Select the gain value for received transmissions. Options are
-12
-
0
.
VAD
This feature is
enabled
by default. To
disable
voice activated detection, click the
slide
button
.
On-hook min
The minimum number of milliseconds required to validate an on-hook event. The default is
1100 milliseconds
.
Off-hook min
The minimum number of milliseconds required to validate an off-hook event. The default is
350 milliseconds
.
Hook flash max
Enter the maximum length of time that the hook flash has to operate. The default is
1099
milliseconds
.
Hook flash min
Enter the minimum length of time that the hook flash has to operate. The default is
151
milliseconds
.
Pulse digit break max
Enter the maximum length of time that the break between digits being dialed will last. The
default is
60 milliseconds
.
Pulse digit break min
Enter the minimum length of time that the break between digits being dialed will last. The
default is
40 milliseconds
.
Pulse digit make max
Enter the maximum length of time that the make between digits being dialed will last. The
default is
60 milliseconds
.
Pulse digit make min
Enter the minimum length of time that the make between digits being dialed will last. The
default is
40 milliseconds
.
Pulse Interdigit min
Enter the minimum length of time that can elapse between digits being dialed. The default
is
250 millisecond
s.
Global
button
Region
Select the location where your VoIP phone is located.
FXS port impedance
Select the impedance value for the FX port. Options are
600 Ohm (20 Hz)
,
600 Ohm (25
Hz)
, and
ETSI (25 Hz)
.The default is
600 Ohm (20 Hz)
.
CID standard
Select caller ID standard. Options are
Telcordia
,
ETSI FSK
,
ETSI DTMF
, and
SIN 227
. The
default is
Telcordia
.
ETSI CID alert signal
Select when Caller ID information is sent to the destination phone. Options are
Full Ring
,
Ring Pulse
,
Dual Tone
, and
Line Re Dual Tone
. The default is
Full Ring
.
ETSI WMWI alert signal
Select when Message Waiting information is sent to the destination phone. Options are
Dual
Tone
,
Ring Pulse
, and
Line Re Dual Tone
. The default is
Dual Tone
.
