ADTRAN SR905acv User Manual Download Page 66

Page: 66 / 123

2. Fill in the fields for the primary network, using the information provided in the table below. The same fields are provided for

2 GHZ and 5 GHz radios.

3. To configure the guest network, click the

Guest

button and modify the fields as needed, using the information provided in

the table below.

4. To configure the video network, click the

Video

button and modify the fields as needed, using the information provided in

the table below.

5. Click the

Apply

button in the

Pending changes...

dialog box to save your settings.

Field Name

Description

Dual-band Primary
Dual-band Guest
Dual-band Video

This feature is

enabled

by default. To

disable

the dual-band feature for these networks, click the

slide button

Summary of Contents for SR905acv



























































































































Search results

Summary of Contents for SR905acv

Reviews:

Related manuals for SR905acv

Brands by name

Popular brands

ADTRAN SR905acv, User Manual

Search results

Summary of Contents for SR905acv

Reviews:

Related manuals for SR905acv

Brands by name

Popular brands