SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
85
1. In the left menu, click
Services
>
SNMP
. The following page appears.
2. To
enable
the SNMP service, click the
slide button
to the right of
Enabled
.
3. Fill in the fields, using the information in the following table. All fields are optional.
4. Click the
Apply
button in the
Pending changes...
dialog box to save your settings.
Field Name
Description
Read community
Enter the SNMP community string for your network which allows read-only access.
Set community
Enter the SNMP community string for your network which allows read-write access.
System name
Modify the name of the gateway.
System location
Modify the default location of this service.
System contact
Enter the email address for the contact person.
Trap manager IP
Enter the IP address of the server where the SNMP trap manager is located.
Allow SNMP to contact
device
This option is
disabled
by default. To
enable
this option, click the
slide button
.
