ADTRAN Express 6100, Manual

Page: 69 / 161

Chapter 3. Terminal Menu Operation and Structure
61200176L1-1 Express 6100/6120 User Manual 3-35
DLCI Mapping/DLCI
Write security: 3, Read security: 5
This is the DLCI associated with this virtual circuit. This value can
range from 16 to 1007.
DLCI Mapping/IP Map
Write security: 3, Read security: 5
This menu represents the IP protocol mapping that is to take place for
this DLCI.
IP Map/Active
Write security: 3, Read security: 5
When this is set to Yes (def), the Express 6100/6120 will attempt to
transport IP packets for this DLCI. A setting of No means that no IP
traffic or route will be exchanged.
IP Map/IARP
Write security: 3, Read security: 5
When this is set to Yes (def), the Express 6100/6120 will send Inverse
ARP packets to determine the IP address on the other end of the vir-
tual circuit. If the IARP is responded to, a route is placed in the IP
route table. A setting of
No means that the route address is to be as-
signed statically using the IP Map/Far-End IP Address parameter.
The Express 6100/6120 will always respond to Inverse ARP requests.
IP Map/Far-End IP Address
Write security: 3, Read security: 5
This is the IP address of the device on the other end of the virtual cir-
cuit. When this DLCI becomes active, the Express 6100/6120 will add
a route in the IP routing table.