ADTRAN Express 6100, Manual

Page: 57 / 161

Chapter 3. Terminal Menu Operation and Structure
61200176L1-1 Express 6100/6120 User Manual 3-23
WAN IP Bridge/Netmask
Write security: 2; Read security: 5
This is the network mask to be applied to the virtual Ethernet port.
WAN IP Bridge/Triggered
Write security: 2; Read security: 5
When set to Yes , only IP RIP updates are sent when the routing table
has changed. When set to No (def), updates are sent periodically.
WAN IP Bridge/Proxy ARP
If this option is set to Yes (def), the Express 6100/6120 will proxy ARP
on the bridge IP port. See the section IP/Proxy ARP on page 3-18 for an
explanation of the proxy ARP function.
»» Bridge/WAN IPX Bridge
When IPX routing is active, the Express 6100/6120 will allow another
WAN device to bridge IPX packets to it using PPP BCP. Normally,
two IPX routers would negotiate PPP IPXCP to exchange IPX packets.
However, if a device can only support PPP BCP, IPX packets are en-
capsulated by the device as bridge packets. The Express 6100/6120
can treat the WAN IPX Bridge as a virtual Ethernet port connected
only to a WAN device which has negotiated PPP BCP. This menu al-
lows the IPX parameters for this virtual Ethernet to be set up.
WAN IPX Bridge/Network
Write security: 2; Read security: 5
This is the network address of the virtual Ethernet port. See IPX/Net-
work on page 3-19 for an explanation of the IPX network number.
RIP version, method, and direction are determined by the
Ethernet parameters set in the
Configuration/IP/IP
Router/RIP menu.