ADTRAN Express 6100, Manual

Page: 71 / 161

Chapter 3. Terminal Menu Operation and Structure
61200176L1-1 Express 6100/6120 User Manual 3-37
IP Map/RIP Direction
Write security: 3, Read security: 5
This parameter allows the direction at which RIP advertisements are
sent and listened to be specified.
IP Map/NAT
The Express 6100/6120 can perform Network Address Translation
over a PVC. Setting this option to
On will cause the Express 6100/6120
to translate between the Ethernet addresses and the configured Link
IP Address . Only one PVC may be used for translation at one time. If
more than one IP Map is configured for NAT, the first PVC which is
activated becomes the NAT port.
DLCI Mapping/IPX Map
This menu represents the IPX protocol mapping that is to take place
for this DLCI.
IPX Map/Active
Write security: 3, Read security: 5
When this is set to Yes (def), the Express 6100/6120 will attempt to
transport IPX packets for this DLCI. A setting of No means that no IPX
traffic or route will be exchanged.
Tx and Rx (def) RIP advertisements are periodically trans-
mitted and are listened to on this virtual cir-
cuit.
Tx Only RIP advertisements are periodically trans-
mitted but are not listened to on this virtual
circuit.
Rx Only RIP is not transmitted on this virtual circuit
but they are listened to.