ADTRAN Express 6100, Manual

Page: 75 / 161

Chapter 3. Terminal Menu Operation and Structure
61200176L1-1 Express 6100/6120 User Manual 3-41
Filters/Out to PVC
Write security: 2; Read security: 5
The packets which transmit out this PVC from the Express 6100/6120
can be filtered in three ways:
Filters/Out Exceptions
Write security: 2; Read security: 5
This is a list of up to 32 filter entries. The setup is exactly the same as
the
Filter/In Exceptions list.
Maintenance DLCI
The Express 6100/6120 can be configured from the WAN without
having to preset a DLCI mapping or IP address. This value is the DLCI
number used to open an IP session by the Express 6100/6120. Any IP
packet arriving from the PVC is assumed to be for the Express 6100/
6120’s IP stack. The destination address in the packet is assigned as the
PVC’s link IP address. The source address is used to add a host route
in the routing table. The default is 901, but any legal DLCI number can
be used.
BECN Timeout
This value is expressed in milliseconds and represents the amount of
time the Express 6100/6120 will stop transmitting over a PVC which
received a packet with the BECN bit set. The default is 1.5 seconds.
Disabled (def) Turns off packet output filtering. No outgo-
ing packets to this PVC are blocked.
Block All All outgoing packets to this PVC are blocked
except as defined in the
Filters/Out Excep-
tions list.
Forward All All outgoing packets to this PVC are not
blocked except as defined in the
Filters/Out
Exceptions list.