ADTRAN Express 6100, Manual

Page: 62 / 161

Chapter 3. Terminal Menu Operation and Structure
3-28 Express 6100/6120 User Manual 61200176L1-1
the section DLCI Mapping/Filters on page 3-39 for examples of how to
set up filter profiles. This menu is used to define the individual filter
defines based on packet type.
Filter Defines /MAC Filter Defines
Write security: 2; Read security: 3
The MAC filter is applied to bridge packets only. Bridge packets
which are forwarded by the bridge functionality of the Express 6100/
6120 are defined here. Up to 32 MAC defines can be specified.
Filter Defines /Pattern Filter Defines
Write security: 2; Read security: 3
The pattern filter is applied to bridge packets only. That is, any packet
which is forwarded by the bridge functionality of the Express 6100/
6120. Up to 32 pattern defines can be specified.
Name Identifies the filter entry
Src Addr 48-bit MAC source address used for comparison.
(hexadecimal format)
Src Mask Bits in the MAC source address which are com-
pared. (hexadecimal format)
Dest Addr 48-bit MAC destination address used for compari-
son. (hexadecimal format)
Dest Mask Bits in the MAC destination address used for com-
parison. (hexadecimal format)
MAC Type 16-bit MAC type field used for comparison. (hexa-
decimal format)
Type Msk Bits in the MAC type field used for comparison.
(hexadecimal format)
Name Identifies the filter entry
Offset Offset from beginning of packet of where to start the
pattern comparison
Pattern 64 bits used for comparison. (hexadecimal format)
Mask Bits in the pattern to be compared. (hexadecimal format)