Adtech CNC9 Series, Maintenance Manual

Page: 125 / 249

ADTECH9 Series CNC Maintenance Manual
- 120 -
034 Default process plane
Range : G17, 18, 19
Unit :
Authority : Operation admin or higher
Default : G18 (L series)/G17 (M series)
Effective time : Instant
Note : Set the default processing plane to XY or XZ; modify the default plane,
so that it isn’t need to specify the modal plane value while programming,
and write plane related instructions directly in stead;
035 T code form (compensation number digits)(L series)
Range : 0~2
Unit :
Authority : Operation admin or higher
Default : 2 (L series)
Effective time : Instant
Note : Used to set the T value in tool change instruction on lathe controller (L
series); the latter digits indicate the compensation number. In some
conventional programming, people usually use two digits to specify the
compensation number used by corresponding tool number;
For example: T0801 M06 indicates changing the #8 tool and
compensating with #1 length.
036 Local IP address
037 Subnet mask
038 Default gateway
Range :
Unit :
Authority : Operation admin or higher
Default : 192.168.0.123
255.255.255.0
192.168.0.1