Adtech ADT-HC4500 User Manual Download

Page: 96 / 134

ADT-HC4500 Flame/Plasma Cutting Machine CNC System

- 95 -

customers.

When selecting languages in parameter configuration interface, if the required language isn’t in the ADT

folder or the folder is empty, the controller will be in Chinese by default.

Notes for HC4500 language configuration file translation:

1. Please copy the configuration file, and open the copied file with Notepad;

2. If it is in Chinese and one character is two bytes, please name it to config2.ini,

If it is English and one character is one byte, please name it to config3.INI.

3. Please translate the content following '=' in the configuration file to Chinese, and keep others

unchanged.

Note:

1. Character ';' is the end of configuration, and followed by note;

2. The '=' symbol shouldn’t exist in notes and configuration values;

3. Do not change the parameter sequence in every interface, and do not use '[]' in notes;

4. To add new parameters, please add to the end of the interface;

5. Due to the small screen of the controller, please control the character quantity when translating

the parameters;

6. Please keep the content in '[]' unchanged;

7. If the equal mark isn’t followed by any content, which is preserved length of previous line, you

can write the excessive part of previous line after translated.

For example: (Chinese info)

[1]=Adtech (Shenzhen) CNC Technology Co., Ltd.; (

≤

60 Byte)

[2]=;

[3]= …;

After translated:

[1]=ADTECH CNC TECHNOLOGY;

[2]= CO., LTD (SHENZHEN);

[3]= …;

5. If you have any question, please refer to the translation document or contact the supplier.

Summary of Contents for ADT-HC4500







































































































































Search results

Summary of Contents for ADT-HC4500

Reviews:

Related manuals for ADT-HC4500

Brands by name

Popular brands

Adtech ADT-HC4500, User Manual

Search results

Summary of Contents for ADT-HC4500

Reviews:

Related manuals for ADT-HC4500

Brands by name

Popular brands