ADT-HC4500 Flame/Plasma Cutting Machine CNC System
- 38 -
Return /
Demonstrate /
Manual /
Back /
Process /
Return reference /
Break
point /
Return
Fig. 3.1.1.2 Pause Treatment
While cutting, if you press [Pause], the following treatment is available according to whether the torch is moved
manually:
1) If the torch isn’t moved manually after pause, you can press the [Start] button directly to make
the controller start perforating and continue to run the program.
2) If someone moves the torch out of the track of the processing file when the program paused,
you can press the [Start] button to pop up the interface shown in Fig.
r
.
[1]. The controller runs idle and returns to the pause position of the processing program, starts
cutting cycle and then runs processing program.
[2]. The controller runs idle, returns to the pause position of the processing program and then
stops.
[3]. The controller starts cutting at current position, returns to the pause position of the processing
program and then runs processing program. For these three functions, press [Y+] or [Y-] to move
cursor “
” up/down to select, and press [OK] to perform the function after selecting.
[4]. Continue running program code on the offset position, but do not return to the track position
when it paused.
Press [ESC], the controller cancels returning and waits in current position for the user deciding
whether continue processing or not.
3) After selecting, the perforating instruction will perform automatically according to program
state; you can press Pause to stop performing M07 instruction.
1.2 Submenu description of Auto interface
1.2.1 Run idle
(Auto)
[F1] (Run idle): The system only runs X, Y tracks, the switches for preheating oxygen, ethyne,
cutting oxygen, starting arc and corner won’t be turned on, used to forecast whether the track and steel
plate size are proper.
The run idle speed is the maximum manual speed, which isn’t controlled by the percentage.