ADT-HC4500 Flame/Plasma Cutting Machine CNC System
- 117 -
Remark:
1)
Please adjust the drive subsections and current dip switch properly during operating. It is recommended
to adjust the drive into 64 subsections, and adjust the current to 1.2 times of motor current.
2)
The unlocked power supply after electrified 5V DC power supply. For 12V DC power, please connect a
1K resistor to MF pin in serial and the power is higher than 1/4W; for 24V DC power, please connect a
2K resistor to MF pin in serial and the power is higher than 1/4W.
3.2 Common anode drive connection
Green
White
Black
Red
Purple/brown
Yellow/blue
85BYGH830A
Step motor
18-40V
DC power
5V motor locked
DC power
+
PU
+
DR
+
MF
V+
V-
AC
BC
A+
A-
B+
B-
Q2BYG404MA drive
Controller XS3 plug