ADS-tec StoraXe PowerBooster GSS0608, Manual

Page: 81 / 140

Switching
off the system
Version:1.3 GSS0608 Page 59 of 72
10.2 Order of disassembly
The procedure described in the following for disassembling the storage system is to be observed under
all circumstances. The modules are removed from the cabinet starting with the top module and working
down.
The module label can be found imprinted on the front label of the module.
WARNING
Risk of death due to falling loads!
Falling and tipping loads can cause fatal injury.

The SRB module weighs approx. 80 kg and requires at least two people to
remove it. Refer to the technical data for the exact weight.

To lift loads, use only lifting equipment that is suitable for the task and in
perfect working order. Lifting eyes are provided on the top of the modules.

Make sure that no persons are located in the hazardous area underneath the
suspended load.

Wear the appropriate protective equipment.
CAUTION
Risk of injury!
Sharp edges cannot be ruled out on the housing.

Wear an appropriate protective equipment.
F
IGURE
33: A
TTACHING THE TRANSPORT COVER
−
Undo the screws securing the DC
power cabling (4 screws per
connector, shown in blue).
−
Disconnect all power cables in the
cabinet.
1