ADS-tec StoraXe PowerBooster GSS0608, Manual

Page: 76 / 140

Commissioning
Page 54 of 72 GSS0608 Version: 1.3
8.1.2 Configuration of the SRC1420 via the web interface
The web interface of the SRC1420 delivers state values for the entire system.
Determine the SRC1420 system from the list of ads-tec devices and enter this IP address in the browser.
The web interface is displayed.
8.1.2.1 EMS operating mode
NOTE
Observe documentation.

For details on the EMS communication interface, see the description "ADS-
TEC EMS_StoraXe Machine Interface".

For details on setting the smart meters, see the description "Connection and
parameterisation of the power meters".
Make the following pre-settings for commissioning:
• Configure the type, address and function of the smart meters used according to the instructions
(

Connection and parameterisation of the power meters
).
•
Select the desired apps with their parameters.
• Enter the IP address of the LAN interface for integration into the customer network
(

8.1.1 Network overview
)
•
INFO: The IP address of the WAN interface for device communication is already preset.
• Make further customisations as required.
8.1.2.2 Master operating mode
NOTE
Observe documentation.

For details on the Master communication interface, see the description "ADS-
TEC Master".
Make the following pre-settings for commissioning:
• Enter the IP address of the LAN interface for integration into the customer network
(

8.1.1 Network overview
)
•
Activate the Modbus function and deactivate the EMS function.
• Make further customisations as required.
8.1.3 Configuration of the SRC4310 via the web interface
The SRC4310 is already preconfigured.