ADLINK Technology Q7-AL, User Manual

Page: 68 / 95

58
BIOS Setup
Feature Options Description
Bits per second 9600
19200
38400
57600
115200
Selects serial port transmission speed. The speed
must be matched on the remote computer. Long or
noisy lines may require lower speeds.
Data Bits 7
8
Select data bits.
Parity None
Even
Odd
Mark
Space
Select parity.
Stop Bits
1
2
Select number of stop bits.
Flow Control
None
Hardware RTS/CTS
Select flow control.
VT-UTF8 Combo Key Support Disabled
Enable
Enable VT-UTF8 combination key support for
ANSI/VT100 terminals.
Recorder Mode
Disabled
Enable
With this mode enabled only text will be sent. This is to
capture terminal data.
Resolution 100x31 Disabled
Enable
Enables or disables extended terminal resolution
Legacy OS Redirection 80x24
80x25
On legacy OSes, the number of rows and columns
supported by redirection
Putty KeyPad VT100
LINUX
XTERMR6
SCO
ESCN
VT400
Select Function Key and KeyPad on Putty.
Redirection After BIOS Post Always Enabled
BootLoader
The Settings specify if BootLoader is selected, then
legacy console redirection is disabled before booting
to legacy OS.
7.3.10. Advanced > USB
Feature Options Description
USB Module version Info only
USB Controllers Info only
USB Devices Info only
Legacy USB Support Enabled
Disabled
Enables Legacy USB support.
XHCI Hand-off Disabled
Enabled
This is a workaround for OSes without XHCI hand-off
support.
USB Mass Storage Driver Support Enabled
Disabled
Enable/Disable USB Mass Storage Driver Support.
USB hardware delays and time-outs: PCH USB Configuration
USB transfer time-out 1 sec
5 sec
10 sec
20 sec
The time-out value for Control, Bulk, and Interrupt
transfers.