ADLINK Technology Q7-AL, User Manual

Page: 14 / 95

18
Specifications
2.9. Debug
•
40-pin flat cable connector to be used with DB-40 debug module
Supports: BIOS POST code LED, BMC access, SPI BIOS flashing, power testpoints, debug LEDs
2.10. Power Specifications
Power Modes AT and ATX mode (AT mode startup controlled by SEMA Board Controller)
Standard Voltage Input
+5V±5% / 5Vsb ±5%
Wide Voltage Input ATX: 5V / 5Vsb ±5% or AT: 5V ±5%
Power Management ACPI 5.0 compliant; Smart Battery support
Power States
Supports C1-C2, S0, S3, S4, S5 (Wake-on-USB S3/S4, WoL S3/S4/S5)
ECO Mode Supports deep S5 for 5Vsb power saving
2.11. Power Consumption
Parameter 12W, E3950
Atom SoC 9W, E3940
Atom SoC 6W, E3930
Atom SoC 6W, N4200
Pentium SoC 6W, N3350
Celeron SoC
Input Type Regulated DC
Voltage Regulated DC
Voltage Regulated DC
Voltage Regulated DC
Voltage Regulated DC
Voltage
Typical Idle
Mode Current
and Power
(EIST enabled;
240GB SSD;
under Windows
10 Enterprise) 0.33A (1.65W)
@ 5V N/A on DVT
Report 0.32A (1.60W)
@ 5V N/A on DVT
Report 0.34A (1.70W) @
5V
Typical
Operating
Mode Current
and Power
(EIST enabled;
240GB SSD;
under
Windows 10
Enterprise) 2.4A (12.00W)
@ 5V N/A on DVT
Report 1.70A (8.50W)
@ 5V N/A on DVT
Report 2.30A (11.50W)
@ 5V
Maximum
Operating
Mode Current
and Power
(EIST enabled;
240GB SSD;
under
Windows 10
Enterprise;
Intel TAT tool
v6.10.13) 3.4A (17.00W)
@ 5V N/A on DVT
Report 2.10A
(10.50W) @
5V N/A on DVT
Report 3.20A (16.00W)
@ 5V
System S3
mode (240 GB
SSD; under
Windows 10
Enterprise 0.08A (0.40W)
@ 5VSB N/A on DVT
Report 0.08A (0.40W)
@ 5VSB N/A on DVT
Report 0.09A (0.45W) @
5VSB