54
•
Intel 810 Chipest Hardware Configuration & Driver Installation
4.2 VGA
Driver
Installation
This section provides information on how to install the VGA driver that come
in the Compact Disk with the package. Please follow the instructions set
forth in this section carefully. Please note that there must be relevant
software installed in your system before you could proceed to install the
VGA driver.
Installing the Drivers for Windows 98/95
The following section describes the normal display driver installation
procedures for Windows 98/95. Use the following procedures when
installing the display drivers for Windows 98/95.
Unzip the driver file to a specific directory. It will create a subdirectory
“Graphics” automatically, click on the subdirectory.
Run SETUP.EXE.
Click 'Next' on Welcome Screen to read and agree to the license agreement.
Click
Yes
if you agree to continue. NOTE: If you click 'No', the program will
terminate.
Click
Yes
to restart your computer and for the new settings to take effect.
Follow the screen instructions and use default settings to complete the
setup when Windows 98/95 is re-started.
Installing the Drivers for Windows NT 4.0
IMPORTANT: You should install the Windows NT 4.0 Service Pack
4(version number: 4.00.1381) first before installing the VGA driver. If you
don't have the Windows NT 4.0 Service Pack 4, please contact your
software vendor or download it from Microsoft's web site.
The procedures below show you how to install the VGA driver for Windows
NT 4.0.
Boot Windows NT 4.0.
Unzip the driver file to a specific directory. It will create a subdirectory
“Graphics” automatically, click on the subdirectory.
Run SETUP.EXE.
Click 'Next' on Welcome Screen to read and agree to the license agreement.
Click Yes if you agree to continue. NOTE: If you click 'No', the program will
terminate.
Windows NT 4.0 will prompt you to restart computer. Click
Yes
for the new
settings to take effect.
Summary of Contents for NuPRO-775 Series
