BIOS Configuration
•
27
At the bottom of the menu are the control keys for use on this menu. If you
need any help in each item field, you can press the <F1> key. It will display
the relevant information to help you. The item help at the right-hand side of
the menu can give the description about the item. The memory display at
the lower left-hand side of the menu is read-only. It will adjust automatically
according to the memory changed. The following describes each item of
this menu.
Date
The date format is:
Day
Sun to Sat (read only)
Month
1 to 12
Date
1 to 31
Year
1994 to 2079
To set the date, highlight the “Date” field and use the PageUp/ PageDown
or +/- keys to set the current time.
Time
The time format is:
Hour
00 to 23
Minute
00 to 59
Second
00 to 59
To set the time, highlight the “Time” field and use the <PgUp>/ <PgDn> or
+/- keys to set the current time.
IDE Primary/Secondary Master/Slave
The onboard PCI IDE connectors provide Primary and Secondary channels
for connecting up to four IDE hard disks or other IDE devices. Each channel
can support up to two hard disks; the first is the “Master” and the second is
the “Slave”.
Award CMOS setup utility provides a sub-menu to enter the specifications
for a hard disk drive.
Summary of Contents for NuPRO-775 Series
