ADLINK Technology NuPRO-775 Series, User Manual

Page: 56 / 73

50
•
BIOS Configuration
Set Supervisor / User Password
These two options set the system password. Supervisor Password sets a
password that will be used to protect the system and Setup utility. User
Password sets a password that will be used exclusively on the system. To
specify a password, highlight the type you want and press <Enter>. The
Enter Password: message prompts on the screen. Type the password, up
to eight characters in length, and press <Enter>. The system confirms your
password by asking you to type it again. After setting a password, the
screen automatically returns to the main screen.
To disable a password, just press the <Enter> key when you are prompted
to enter the password. A message will confirm the password to be disabled.
Once the password is disabled, the system will boot and you can enter
Setup freely.
CMOS Setup Utility – Copyright (C) 1984-2000 Award Software
► Standard CMOS Features ► Frequency/Voltage Control
► Advanced BIOS Features Load Fail-Safe Defaults
► Advanced Chipset Features Load Optimized Defaults
► Integrated Peripherals Set Supervisor Password
► Power Management Setup Set User Password
► PnP/PCI Configurations Save & Exit Setup
► PC Health Status Exit Without Saving
Esc : Quit F9 : Menu in
BIOS Ç È Æ Å : Select Item
F10 : Save & Exit Setup
Set Supervisor Password
Enter Password: