BIOS Configuration
•
33
Boot Up Floppy Seek
Enabled <Default>
The BIOS will seek whether or not the floppy drive
installed has 40 or 80 tracks. 360K type has 40
tracks while 760K, 1.2M and 1.44M all have 80
tracks
Disabled
BIOS will not search the type of floppy disk drive
by track number
Boot Up NumLock Status
On <Default>
Keypad is number keys
Off
Keypad is arrow keys
Gate A20 Option
This field allows you to select how Gate A20 is worked. Gate A20 is a device
used to address memory above 1 MB.
Fast <Default>
The A20 signal controlled by chipset specific
method
Normal
The A20 signal controlled by keyboard controller
or chipset hardware
Typematic Rate Setting
Enabled
Enable typematic rate and typematic delay
programming
Disabled <Default>
Disable typematic rate and typematic delay
programming. The system BIOS will use default
value of these 2 items And the default controlled
by keyboard
Typematic Rate (Chars/Sec)
When the typematic rate is enabled, the system registers repeated
keystrokes speeds. You can select speed range from 6 to 30 characters per
second. By default, this item is set to
6.
Typematic Delay (Msec)
When the typematic rate is enabled, this item allows you to set the time
interval for displaying the first and second characters. By default, this item is
set to
250msec.
Security Option
This field allows you to limit access to the System and Setup.
Summary of Contents for NuPRO-775 Series
