Award BIOS Setup
48
IDE HDD Block Mode:
Block mode is also called block transfer, multiple commands, or multiple
sector read/write. If your IDE hard drive supports block mode (most new
drives do), select Enabled for automatic detection of the optimal number of
block read/writes per sector the drive can support.
The choice: Enabled, Disabled
OnChip IDE Channel 0 / 1:
The integrated peripheral controller contains an IDE interface with support
for two IDE channels. Select
“
Enabled
”
to activate each channel separately.
The choice: Enabled, Disabled.
IDE Primary / Secondary Master / Slave PIO:
The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode
(0-4) for each of the four IDE devices that the onboard IDE interface
supports. Modes 0 through 4 provide successively increased performance.
The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3 and Mode 4.
IDE Primary / Secondary Master / Slave UDMA:
Ultra DMA/33 implementation is possible only if your IDE hard drive
supports it and the operating environment includes a DMA driver (Windows
95 OSR2 or a third-party IDE bus master driver). If your hard drive and your
system software both support Ultra DMA/33, select
“
Auto
”
to enable BIOS
support.
The choice: Auto, Disabled.
VIA On-Chip PCI Device:
Phoenix - AwardBIOS CMOS Setup Utility
VIA On-Chip PCI Device
Realtek ALC650
Onchip USB Controller
Onchip EHCI Controller
USB Keyboard Support
USB Mouse Support
Enabled
All Enabled
Enabled
Disabled
Disabled
Item Help
____________________________
Menu Level
Ø
↑↓→←
Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-safe defaults F7: Optimized Defaults
PDF created with FinePrint pdfFactory Pro trial version
www.pdffactory.com
