ADLINK Technology NuPRO-761 User Manual Download

Page: 47 / 72

Award BIOS Setup

Security Option:

Select whether the password is required every time the system boots or only
when you enter setup.

System---The system will not boot and access to Setup will be denied if

the correct password is not entered at the prompt.

Setup---The system will boot, but access to Setup will be denied if the

correct password is not entered at the prompt.

Note: To disable security, select PASSWORD SETTING at Main Menu and then you will be

asked to enter password. Do not type anything and just press <Enter>, it will disable

security. Once the security is disabled, the system will boot and you can enter Setup

freely.

OS Select For DRAM > 64MB:

Select the operating system that is running with greater than 64MB of RAM
on the system.

The choice: Non-OS2, OS2.

Video BIOS Shadow:

Enabling this function will allow the Graphic card

’

s BIOS setting to be

imaged onto the RAM for a better performance.

The choice: Enabled, Disabled.

Small Logo (EPA) Show:

Set the Logo (EPA) show or not.

The choice: Enabled, Disabled.

PDF created with FinePrint pdfFactory Pro trial version

www.pdffactory.com

Summary of Contents for NuPRO-761









































































Search results

Summary of Contents for NuPRO-761

Reviews:

Related manuals for NuPRO-761

Brands by name

Popular brands

ADLINK Technology NuPRO-761, User Manual

Search results

Summary of Contents for NuPRO-761

Reviews:

Related manuals for NuPRO-761

Brands by name

Popular brands