manualshive.com logo in svg

ADLINK Technology NuPRO-598 Series, User Manual, Page: 78 / 90

Share
Download
ADLINK Technology NuPRO-598 Series User Manual Download Page 78

 

70 

•

 LAN Driver Installation Guide 

6.3 

Software Drivers Support 

NetWare ODI Drivers 

Novell NetWare 3.x, 4.x, NetWare LAN WorkPlace TCP/IP, Novell LAN 
Analyzer for NetWare. 

Packet Drivers 

FTP PC/TCP, NCSA TCP/IP. 

NDIS Drivers 

Microsoft LAN Manager V2.x, Windows 3.x, Windows NT 4.0, Windows NT 
3.51, Windows 98, Windows 95, SCO3, SCO5; IBM LAN Server 4.0 for 
DOS and OS/2, and Linux. 

6.4 

Running Diagnostics 

The NuPRO-598 comes with two diskettes containing drivers and 
diagnostic software supporting the Intel 82559 Ethernet controller. Follow 
the steps below to use the 

Setup Utility

.

 

1.

 

Run the file SETUP.EXE typing a:\setup or 

x:\CHIPDRV\LAN\82559\setup.exe

 in the DOS prompt, assuming your 

floppy disk drive is drive A. Upon doing so, the system starts the 

Setup 

Utility

 and shows the following screen.

 

 

8255x-based PCI EtherExpress™ adapter Setup V4.21 

 

 

 

 

 

Main Menu 

 

Automatic setup 

 

 

View adapter configuration 

 

Test adapter 

 

Install network drivers 

 

View Help files 

 

Exit Setup 

 

 
Choose AUTOMATIC SETUP to view the adapter’s configuration, make sure it 
works properly, and install the software needed to connect to your network. 
 
Help = F1   Exit = Esc     Select = 

↑↓

     Action = 

↵

 

 

Summary of Contents for NuPRO-598 Series



























































































Reviews:

No comments