ADLINK Technology NuPRO-598 Series, User Manual, Page: 59 / 90

BIOS Configuration
•
51
CPUFAN Off In Suspend
The fan of CPU is stopped by the BIOS when in Suspend mode.
Enabled
<Default>
The fan of CPU stops in suspend mode.
Disabled The fan is always active.
PowerOn by Ring/Wake Up On Lan
Enabled
<Default>
Wake up the system from modem or lan
Disabled Disable the modem or lan to wake up the system
IRQ 8 Break Suspend
You can enable or disable the monitoring of IRQ 8 (Real Time Clock) so it
does not awaken the system from Suspend mode.
Reload Global Timer Events
This section determines the reloading of the ‘timers’ after entering the Full
On You can enable or disable the monitoring of IRQ 8 (Real Time Clock) so
it does not awaken the system from Suspend mode.
PM Events
The VGA, LPT & COM, HDD & FDD, DMA /master, PWR-On by
Modem/LAN, RTC Alarm Res ume and Primary INTR section are I/O events
which can prevent the system from entering a power saving mode or can
awaken the system from such a mode. When an I/O device wants to gain
the attention of the operating system, it signals this by causing an IRQ to
occur. When the operating system is ready to respond to the request, it
interrupts itself and performs the service. If activity is detected from any
enabled IRQ channels, the system wakes up from suspended mode.
Panel Type Selectable
If there installs a LCD panel on the system, you can also select the panel
type in this item. There are 16 panel types can be selected.
Panel-16 1024x768 Dual Scan STN Color Panel
Panel-1 1280x1024 TFT Color Panel
Panel-2 640x480 Dual Scan STN Color Panel
Panel-3 800x600 Dual Scan STN Color Panel
Panel-4 640x480 Sharp TFT Color Panel
Panel-5
<Default>
640x480 18-bit TFT Color Panel
Panel-6 1024x768 TFT Color Panel
Panel-7 800x600 TFT Color Panel