Introduction
•
5
♦
Serial Port:
•
Two 16550 UART compatible ports with COM1 as RS232 and
COM2 as selectable RS232/422
•
ESD protection to 2KV
♦
Enhanced IDE:
One Enhanced IDE interfaces for up to two devices, support PIO Mode
3/4 or Ultra DMA/33 IDE Hard Disk and ATAPI CD-ROM, LS-120, ZIP.
♦
FDD Interface:
One floppy drives (360KB, 720KB, 1.2MB, 1.44MB, 2.88MB).
♦
CRT/LCD: C&T 69000 chipset
•
Embedded 2MB SDRAM display memory
•
Simultaneous CRT & LCD display
•
LCD panel supports DSTN/TFT
•
1280x1024x8bpp colors CRT resolution
•
Up to 1280x1024x8bpp colors resolution for color active matrix TFT
panels (12, 18, and 24bit analog) or (12+12), (18+18) double
pixel/CLK interface
•
RAMDAC Latch-up protection
♦
USB Interface:
•
Two USB pin-header connectors, compliant with USB Specification
Rev. 1.1
•
Individual over-current protection
♦
DiskOnChip:
The M-Systems flash disk supports system boot and storage capacity
from 2MB to 144MB.
♦
Watchdog Timer: programmable
•
Program I/O port 3F0H and 3F1H to configure watchdog timer
•
Time-out timing select 0~255 seconds/minutes
♦
Green Function:
Power management via BIOS, activated through mouse/keyboard
movement.
Summary of Contents for NuPRO-598 Series
