
40
•
BIOS Configuration
CPU Internal Cache / External Cache
Cache memory is additional memory that is much faster than conventional
DRAM (system memory). CPUs from 486-type on contain internal cache
memory, and most, but not all, modern PCs have additional (external)
cache memory. When the CPU requests data, the system transfers the
requested data from the main DRAM into cache memory, for even faster
access by the CPU. These items allow you to enable (speed up memory
access) or disable the cache function.
Enabled
<Default>
Open CPU Internal Cache / External Cache
Disabled
Close CPU Internal Cache / External Cache
Quick Power On Self Test
When enabled, this field speeds up the Power On Self Test (POST) after
the system is turned on. If it is set to
Enabled
, BIOS will skip some items.
Enabled
<Default>
Enable quick POST
Disabled
Normal POST
Boot From LAN First
This field allows you to use a bootable LAN device to boot the system first.
Enabled
Boot the system from LAN first
Disabled
<Default>
Boot from the device on the system
Boot Sequence
This field determines the drive that the system searches first for an
operating system. The options are :
A, C, SCSI
<Default>
D, A, SCSI
SCSI, C, A
C, A, SCSI
C only
C, CDROM, A
ZIP100, C
CDROM, C, A
SCSI, A, C
LS120,C
Summary of Contents for NuPRO-598 Series
