3-24 Initialization & Installation
Read Leading Code Setting
@Description
Read command leading code setting and host watchdog status.
@Syntax
~(Addr)0<CR>
~
Command leading code.
(Addr)
Address ID
0
Read command leading code setting.
@Response
!(Addr)(Status)(C1)(C2)(C3)(C4)(C5)(C6)<CR>
or
?(Addr)<CR>
!
Command is valid.
?
Command is invalid.
(Addr)
Address ID
(Status)
(2-character)
Bit 0 : Reserved
Bit 1 : Power failure or watchdog failure
Bit 2 : Host watchdog is enable
Bit 3 : Host failure
(C1)
Leading code 1, for read configuration status,
firmware version, etc. default is
$. (1-character)
(C2)
Leading code 2, for read synchronize sampling,
digital output ,default is
#. (1-character)
(C3)
Leading code 3, for change configuration.
default is
%. (1-character)
(C4)
Leading code 4, for read alarm status, enable
alarm, etc. default is
@. (1-character)
(C5)
Leading code 5, for read command leading code,
change command leading code, etc. default is
~.
(1-character)
(C6)
Leading code 6, this leading code is reserved.
default is
*
. (1-character)
Summary of Contents for ND-6021
Page 1: ...ND 6021 ND 6024 Analog Input Modules User s Guide...
Page 14: ......
Page 20: ......
Page 54: ......
