3-16 Initialization & Installation
3. 10. Analog Data Output
@Description
Send a value to analog output module at specified address. The data
format of the value can be engineering unit, percent, or hexdecimal
value, which is set by configuration setting command.
(ND-6024 only supports engineering format.)
@Syntax
#(Addr)(OutData)<CR> (6021 Only)
#(Addr)(Port)(OutData)<CR> (6024 Only)
#
Command leading code.
(1-character)
(Addr)
Address ID.
(2-character)
(Port)
A, B, C or D
(OutData)
Value of the analog output signal,. The unit of the
value can be engineering units, % of FSR, or
hexadecimal value. Refers to chapter 4 for details
of the data format.
@Response
><CR>
or
?(Addr)<CR>
>
Command is valid.
?
Command is invalid or no synchronized sampling
command was issued.
(Addr)
Address ID.
@Examples
User command:
#0616.000<CR>
Response:
><CR>
Summary of Contents for ND-6021
Page 1: ...ND 6021 ND 6024 Analog Input Modules User s Guide...
Page 14: ......
Page 20: ......
Page 54: ......
