Chapter 2
Product Overview
CoreModule 740
Reference Manual
11
Jumper Header Definitions
describes the jumper headers shown in
. All jumper headers provide 0.079" (2mm)
pitch.
Figure 2-8. Jumper Header Locations (Top-Side View)
Specifications
Physical Specifications
gives the physical dimensions of the module.
Table 2-3. Jumper Settings
Jumper Header
Installed
Removed/Enabled
JP1 – Real Time Clock Reset
Enable
Disable
(Default)
JP2 – LVDS Voltage Selection
3.3V (1-2)
(Default)
5V (2-3)
Table 2-4. Weight and Footprint Dimensions
Item
Dimension
NOTE
Overall height is measured from the
upper board surface to the highest
permanent component (PC/104 bus
connector) on the upper board surface.
This measurement does not include the
heatsink, which can vary. The heatsink
could increase this dimension.
Weight
0.12 kg (0.25 lbs)
Height (overall)
11.05 mm (0.435 inches)
Board thickness
2.362 mm (0.093 inches)
Width
90.169 mm (3.55 inches)
Length
95.884 mm (3.775 inches)
JP2
JP1
CM740_T
op_Jmpr_a
Key:
JP1
- Real Time Clock Reset
JP2
- Voltage Selection