ADLINK Technology CoreModule 730, Reference Manual

Page: 15 / 36

Chapter 2 Product Overview
CoreModule 730 Reference Manual 11
Figure 2-6. Header, Connector, Socket Locations (Front View)
Jumper Header Definitions
Table 2-3 describes the jumper headers shown in Figure 2-6 .
Note: All jumper headers use 0.079" (2mm) pin spacing.
NOTE Pin 1 is shown as a black pin (square or round) on vertical headers in all
illustrations. Black dots on right-angle headers indicate pin 2.
Table 2-3. Jumper Settings
Jumper # Installed Removed/Installed
JP2 – LVDS Voltage
Select +3.3 Volts (Pins 1-2) Default +5 Volts (Pins 2-3)
JP3 – IDE Select Enable HDD master, CF slave (Pins 1-2)
Default
Enable HDD slave, CF master
(Pins 2-3)
JP4 – Compact Flash
Voltage Select +5 Volts (Pins 1-2) +3.3 Volts (Pins 2-3) Default
JP8 – N/A For manufacturing only For manufacturing only
JP9 – Clear CMOS Normal (pins 1-2) Default Clear CMOS Setup (pins 2-3)
J25 J27
J26
JP8
JP3
JP4
JP9
J20
J17
J9
J3
J12
J13
J6
J5
J23
J8
J2
CM730_conn_front_b