ADLINK Technology CoreModule 730, Reference Manual

Page: 13 / 36

Chapter 2 Product Overview
CoreModule 730 Reference Manual 9
Figure 2-4. Component Locations (Back View)
Header, Connector, and Socket Definitions
Table 2-2 describes the headers, connectors, and sockets shown in Figure 2-6 . All I/O interfaces use 0.100"
(2.54mm) pitch unless otherwise indicated.
Table 2-2. Header, Connector, and Socket Descriptions
Reference # Access Description
J2 – Memory Front 200-pin, 0.024" (0.60mm) socket for DDR2 SDRAM SODIMM
J3 – Ethernet Front 10-pin, 0.079" (2mm), right-angle header for 10/100/1000BaseT
Gigabit Ethernet port
J5 – SUMIT A Front 52-pin, 0.025" (0.635mm) connector for out-going USB, PCIe,
Power, ACPI, SMBus, I2C, SPI, LPC, Serial, Keyboard, Mouse,
and Clock signals
J6 – SUMIT B Front 52-pin, 0.025" (0.635mm) connector for PCIe and Power
J7 – VGA Front 12-pin, 0.079" (2mm), right-angle, shrouded header for Video
Out
J8 – LVDS Front 20-pin, 0.079" (2mm), right-angle header for Video Out
J9 – IDE Front 44-pin, standard header for primary IDE interface
J10 – Compact Flash
(on back of the board;
see
Figure 2-4 )
Back 50-pin, 0.050" (1.27mm) socket for Type I or II Compact Flash
cards
J10
T1
CM730_comp_back_b