Adjust-A-Sink® E140 System by Accessible Systems Inc. | Minneapolis, MN | 612-238-4600 | www.adjustasink.com
6 of 25
2F.
Mount the laminated or solid
surface front panel to the slide
section using four #10-32
screws with plastic spacers.
2G.
IF your shampoo bowl uses
a bracket, attach it now to the
front panel using ¼-20 x 1-1/4”
bolts.
NOTE: Comfort Fit bowls have
the mounting bracket molded
into the bowl itself, if this is the
bowl you have, skip this step,
there is not separate bracket to
mount.
2H
. Test the operation of the
height adjustment buttons on the
front panel. The buttons are
pre-adjusted at the factory to
properly engage the switches on
the lift unit, but can be field
adjusted if needed.
Height buttons