Adjust-A-Sink® E140 System by Accessible Systems Inc. | Minneapolis, MN | 612-238-4600 | www.adjustasink.com
3 of 25
1A
. The Adjust-a-Sink is 22” wide and
34” high, the sink and backsplash will
elevate to 48”.
The drain waste rough in should be
centered beneath the sink, the center
of the drain is 1 0” f rom t h e left edge of
the metal mounting panel. Keeping
this in mind will simplify the process.
The supplies should both be located
on the left side of the drain.
A GFCI receptacle should be installed
to the right of the drain. Alternately,
salon workstations typically have
receptacles in a cabinet on the right
side of the sinks, holes can be drilled
and the power cord can be passed
through to these connections. The
E140 comes with a 10’ 3-prong power
cord.
Installed Unit – in UP Position
Please see page 19 of these instructions for the E140
Plumbing Rough-In Drawing
The following Step-by-Step Instructions reference the following Accessible Systems drawings:
E140 Overall Assembly, Sheets 1 through 3
E140 Plumbing Rough-in Drawing (sheet 4)