ADJ Products, LLC • Los Angeles, Ca USA • Kerkade, Netherlands
12
When building a panel array, it is advisable to build the array in one piece, right to left looking at the rear of the screen. This way, the panels can be
easily and evenly
configured
to produce a seamless array.
When adding a horizontal panel, the horizontal locking pins should be retracted. Once the next panel is in place, release the horizontal locking pin
and loosely screw it into place so it is locked with the panel beside it. Only tighten it up once the front of the panels are completely seamless. Note
that fastening the locking pins too tight can warp the screen and prevent a seamless screen.