ADI LT boiler – Technical manual
Page
21
11.3 ERROR CODES VISUALIZED ON THE DISPLAY
See the errors list in the appendix at the end of the present document.
To show the error subcode, follow the procedure indicated in the paragraph 10.4 of this document.
11.4 OPTIONAL: FLOW TEMPERATURE FUNCTION OF OUTSIDE TEMPERATURE
Attention: this function is optional and must be notified to the Official Technical Service in order to activate it.
An outside temperature probe should be added (supplied separately from the boiler and not included in the
price) and connected to terminals 1 and 2 of the strip X10-06 positioned in the LMU control unit of the ADI LT
boiler.
These are the possible curves of operation:
Boiler flow
temperature (ºC)
External temperature (ºC)
11.5 VIEW OF THE BOILER CONTROL UNIT
According to the boiler model, the position of
the control unit varies:
The position of the strip and of the contactor vary
(just in models of big power output). See electric
diagrams.
