ADI LT boiler – Technical manual
Page
16
10.1 DISPLAY
10.2 STANDARD OR INITIAL DISPLAY
10.3 ADJUSTMENT OF THE SET-UP BOILER FLOW TEMPERATURE
The boiler flow temperature wiil be changed according to the configuration (with or without external temperature
sensor).
1
Not available (water pressure)
2
Values
3
Maintenance, manual operation
To take measurements of the boiler flues
.
Stop of the active controller
4
Not available: D.H.W.S.: temperature or D.H.W.S. actived.
Heating activated or reading of boiler set-up temperature
: reading of the outside temperature
: level of operation at a nominal set-up temperature
: level of operation at a reduced set-up temperature
: flame
: failure
5
Time of day, adjustments of parameters or error code
6
Heating circuit operation mode:
Automatic, according to the time program at a nominal
set-up temperature or at a reduced set-up temperature.
: operation at a nominal set-up temperature all the time.
: operation at a reduced set-up temperature all the time.
: boiler in standby / waiting.
7
Not available: D.H.W.S. operation mode
8
Time programming of use of the heating circuit
1
Operation mode for heating
2
Not available (D.H.W.S. mode)
3
Level of operation of the heating circuit
4
Time of day
5
Real value of the boiler flow temperature
6
Not available
7
State of the flame
8
Time bar
9
Boiler operation mode
Meaning
Press the button T4 of flow temperature to adjust the set-up
temperature of the heating circuit
Increase the set-up value by pressing T9, or decrease it by
pressing T8
Press the button T2 to save the changes and go back to the
initial display.
