ADI LT boiler – Technical manual
Page
15
10. CONTROL PANEL - SIEMENS
The boiler control panel is placed in the upper part of the boiler front.
ITEM
Concept
1
Button for boiler reset (T1)
2
Not operational: Select D.H.W.S. circuit (T2). D.H.W.S. on/off
3
Select heating circuit 1 (T3). Change the operation mode:
•
Automatic mode: Circuit 1 works according to time program 1
•
Permanent nominal mode according to the circuit setpoint
, adjustment by default.
•
Permanent mode according to reduced setpoint
•
Standby: circuit 1 disconnected, anti-freezing function activated
.
4
Adjust boiler set-up flow temperature (T4)
5
Not operational: Adjust D.H.W .S. set-up temperature
6
7
Button to change the line of the display that you want to select
(T6)
to go down, (T7)
to go up.
8
9
To modify the values of adjustment of the parameters on the display,
To decrease (T8), and to increase (T9)
10
Access to the available information
11
Display of data and operation modes
12
Function maintenance, stop controller (press simultaneously switches 4 and 5)
To go to the initial display, press T2
(A) Boiler on/off switch (11) Display: readings, messages, errors...
(A)
(11)
