Adisa ADI CD 375, Technical Manual Of Installation, Use And Maintenance

Page: 39 / 76

ADI CD boiler - Technical Manual
39
13.1 Heating circuits basic parameters
Activation of heating circuits
Heating circuits are deactivated in default parametrization (heat demand of the boiler is given by the parameter 1859
“Flow temp setp cons request”). Adjust the following parameters to enable the heating circuits and to assign the
extension modules to each heating circuit.
Configuration
Line Nr. Function Adjustment
5710 Heating circuit 1 On
5715 Heating circuit 2 On
5721 Heating circuit 3 On
6020 Function extension module 1 Heating circuit 1
6021 Function extension module 2 Heating circuit 2
6022 Function extension module 3 Heating circuit 3
Default values
HC1 HC2 HC3
Line Nr. Line Nr. Line Nr. Function Default Value Unit
710 1010 1310
Comfort
setpoint 20 ºC
712 1012 1312
Reduced
setpoint 15 ºC
714 1014 1314
Frost Protection
setpoint 6 ºC
716 1016 1316
Comfort
setpoint max 25 ºC
720 1020 1320 Heating curve slope 2,5 -
721 1021 1321 Heating curve displacement 0 ºC
730 1030 1330 Summer/winter heating limit
---
ºC
732 1032 1332 24-hour heating limit
---
-
740 1040 1340 Flow temp setpoint min 25 ºC
741 1041 1341 Flow temp setpoint max 85 ºC
770 1070 1370 Boost heating 2 ºC
780 1080 1380 Quick setback
Down to
Reduced
setpoint -
809 1109 1409 Continuous pump operation No
812 1112 1412
Frost Protection
flow temp On
830 1130 1430 Mixing valve boost 5 ºC
832 1132 1432 Actuator type 3 positions -
834 1134 1434 Actuator running time
Depending on the
actuator s
13.2 Professional installator parameters
Operating mode
74
71
z
49
/0109
The operating modes of the heating circuits are selected directly with the operating mode button.
This setting is used to switch between different operating modes. Functionality corresponds to the operating mode
selection via the operating mode button:

Automatic operation

Continuous operation or

Protection mode