Adisa ADI CD 375, Technical Manual Of Installation, Use And Maintenance

Page: 22 / 76

ADI CD boiler - Technical Manual
22
Overview of setting
USER LEVELS SETTINGS
Enduser
Time of day and date
Commissioning Operator section
Heating engineer Wireless
OEM
Time prog heating circuit 1
Time prog heating circuit 2
Time prog 3/heating circuit 3
Time program 4/DHW
Time program 5
Holidays heating circuit 1
Holidays heating circuit 2
Holidays heating circuit 3
Certain functions or
parameters could be
hidden depending on
the user level chosen!
Heating circuit 1
Heating circuit 2
Heating circuit 3
DHW
Consumer circuit 1
Consumer circuit 2
Boiler
Cascade
Solar
Buffer storage tank
DHW storage tank
Configuration
LPB
Fault
Maintenance/special operation
Input/output test
State
Diagnostics cascade
Diagnostics heat generation
Diagnostics consumer
Burner control
Parameters setting
These examples below show a basic programme process:
Setting of the time of day and date
From initial display, press OK button and select “
Time of day and date
”. Press OK button and set the parameter 1
“
Hours/minutes
”
.
+
Press OK button and the value will blink. While the value is blinking, use the setting knob to set the correct time.
Confirm with OK button.
+ +
Move the setting knob and set the parameter 2 “
Day/month
”.