Adisa ADI CD 375, Technical Manual Of Installation, Use And Maintenance

Page: 23 / 76

ADI CD boiler - Technical Manual
23
Press OK button and the value will blink. While the value is blinking, use the setting knob to set the correct date.
Confirm with OK button.
+ +
Move the setting knob and set the parameter 3 “
Year
”.
Press OK button and the value will blink. While the value is blinking, use the setting knob to set the correct year.
Confirm with OK button.
+ +
Press ESC button to return to the main display, where the boiler temperature is shown.
Setting of boiler flow temperature – Setpoint
From initial display, press INFO Button for 3 seconds. It appears the different user levels.
+
Move the setting knob and set “
Commissioning
” level. Press OK button. You are now in the general menu.
+
Move the setting knob and set “
Consumer circuit 1
”. Press OK button.
+
The first parameter, 1859 “
Flow temp setp cons request
” is the boiler flow temperature (setpoint).
Press OK button and the value will blink. While the value is blinking, use the setting knob to set the temperature.
Confirm with OK button.
+ +
Press ESC button to return to the main display, where the boiler temperature is shown.
Setting of Language
From initial display, press OK button and select “
Operator section
” with the setting knob. Press OK button and set
the parameter 20 “
Language
”
.
+ +
Press OK button and the value will blink. While the value is blinking, use the setting knob to set the correct
language. Confirm with OK button.
+ +
7471z
64
e/0209