24
General Handling Precautions
General Handling Precautions
H
CAUTION
The electronic stimulator has a high voltage output capacity of
up to
±
50 V.
Directly touching the output terminals or electrodes during
stimulation or when the power cable is connected during
inspection and the stimulator is operable may result in electric
shock.
1. The timing for each stimulation waveform setting is set automatically
according to the following eqvation.
[Fig.27]
Setting is performed in the order T1 > T2 > T4 > T3 > n.
[Fig.28]
2. Make sure that operation has stopped before pressing the keys. If the keys are
pressed while the stimulator is operating, the new setting will be reflected in
stimulator operation immediately. Care must therefore be taken as unexpected
stimulation may result.
3. When all the number settings on the dial are set to 0, the following occurs.
CYCLE: Continuous stimulation (indicated as “run”)
DELAY: Delay time = 0
TRAIN: Continuous stimulation (indicated as “run”)
Stimulation waveform
setting
