2
Introduction
Introduction
The electronic stimulator is used for the basic physiological and
pharmacological research and experiments.
This device is designed for experimental and research
applications and must not be used for therapeutic purposes.
WARNING
By simple operation of the panel, a single pulse, pair pulse, train pulse
and repeat pulse according to main interval can be output, as well as
various mixed waveforms in combination with an external signal, and a
biphasic pulse.
The stimulator is also equipped with a booster amplifier to allow field
stimulation.
Features
/
Simple train stimulation
A single pulse, pair pulse or train pulse can easily be output.
/
Built-in main interval function, independent of stimulation waveform
setup
Starting/Stopping and the repeat time and repeat count can be set separately
using the main interval function, ensuring simple, reliable operation.
/
Field stimulation
The built-in booster amplifier with a maximum output of
±
50 V and 400
mA enables direct field stimulation with any stimulation waveform.
/
Simple biphasic pulse stimulation
/
Mixing and modulation input terminals that allow output of mixed and
modulated waves through combination with an external signal
/
Alternate stimulation by the addition of an evoked response to eliminate
/
High precision, high reliability design
By adopting a crystal oscillator as the internal base oscillation source and
combined with IC technology, time-related items can be controlled with
extreme precision, ensuring excellent reliability and reproducibility as well
as stable operation.
/
Fine adjustment of output voltage
The output voltage setting can be adjusted up to 10 V.
/
Input/Output protection circuit
The built-in protection circuit prevents damage in the event of an accidental
short circuit in the output terminal or synchronization signal output terminal
or excessive voltage (max. 50 V) to the input terminal.
