14
Description of Parts
Name
I
Polarity selector key
(
, OFF,
)
J
Output voltage display
(VOLTAGE)
Function
Switches the polarity of the stimulation pulse.
indicates positive polarity
and
negative polarity.
The selection governs both the isolator connector and the output terminals.
Output is 0 V when OFF is selected.
Sets the output voltage of the stimulation waveform. Setting is performed by
the same method as for other settings.
Normally, setting is 0 mV or from 10 mV to 10 V. If
±
50 V is selected, setting is
0 mV or from 10 mV to 50 V. (1 mV to 9 mV cannot be set.)
This setting does not affect the mixing signal or modulation signal. DC voltage
in DC mode is also set.
When negative polarity (
) is selected with the polarity selector key, it is read
as it is as minus voltage. Output precision in relation to the command is within
±
5%
±
50 mV.
Stimulation Waveform Output
This sets the polarity of the waveform generated by stimulation waveform
setup and the output voltage.
I
J
K
L
M
[Fig.15]
