![background image](http://html1.mh-extra.com/html/adicos/m-busmaster-xf/m-busmaster-xf_operating-manual_2851351018.webp)
DESCRIPTION OF PRODuCT
13
ADICOS M-BUSMASTER XF
420-2410-003 EN20
Vibration
The electronics contained in the ADICOS M-BUSMASTER XF can be damaged when subjected
to vibration. If there are any sources of strong vibration near where the device is installed, it
has to be positioned such that it is immune to the vibration.
Electromagnetic Radiation
The electronics contained in the ADICOS M-BUSMASTER XF can be damaged when subjected
to electromagnetic radiation. So do not place the device near high voltage equipment. And
always use shielded cable.
5.2 Wiring Specifications
WARNING!
Incorrect installation of the ADICOS M-BUSMASTER XF can cause malfunction
-
ing, leading to failure of the fire detection system.
• Only properly trained personnel may wire the equipment!
• Deenergize the entire detector system before performing any type of wiring
work!
• Use only ADICOS connection cables and ADICOS branching and connection
boxes to connect the detector!
ADICOS
M- Busmaster
Service PC
ADICOS AAB
Additional detectors
ADICOS
detectors
External power supply unit
ADICOS NT V40-A3
(optional)
Fig. 7
In addition to the basic wiring configuration shown here, refer to the wiring examples in the
manuals for the individual detectors.
When wiring the devices, be aware of the number of detectors and the maximum cable
lengths. The maximum line length is a factor of the number of detectors as well as the cable
capacity (Refer to Chap. 10, »Technical Data«).