![background image](http://html1.mh-extra.com/html/adicos/m-busmaster-xf/m-busmaster-xf_operating-manual_2851351015.webp)
10
ADICOS M-BUSMASTER XF
420-2410-003 EN20
DESCRIPTION OF PRODuCT
3.5 Jumper
3.5.1
Jumper Settings “Interface”
The interface through which the
ADICOS M-BUSMASTER XF
communicates can be configured
with the jumpers A0 and A1.
A0
A1
Fig. 4
The setting “Operation via RS-232 interface” corresponds to classic master operation. The
data from the detector connected to the M-Bus is transferred for further processing via the
RS-232 interface to a PC with ADICOS software.
M-BUS Repeater
If the setting “Operation via M-Bus input” was selected, the
ADICOS M-BUSMASTER XF
works in
slave mode. This means that the data is not transmitted to a PC but to a higher-ranking M-Bus
master instead. This feature is essential with larger systems or when cables to the service PC
are outside of the permitted range (max. 3 m).
Operation via RS-232
Operation via M-Bus
input (“Slave”)
Operation via optional
module (Ethernet, etc.)
A0
A1
A0
A1
A0
A1
Fig. 5