background image

FOR yOuR SAFETy

3

ADICOS M-BUSMASTER XF

420-2410-003 EN20

2  For your safety

WARNING!

Incorrect installation or operation can lead to death, serious injury and damage 

to industrial equipment.

•  Read this manual thoroughly and follow all of the instructions!

When properly installed, started up, operated and serviced, the 

ADICOS M-BUSMASTER XF

 

ensure  operational  safety  at  your  facility.  But  it  is  imperative  that  the  manual,  including  all 

safety notes, be read, understood and followed completely.

2.5  Intended Use

The 

ADICOS M-BUSMASTER XF

 is designed in line with state-of-the-art technology and ac

-

cepted safety regulations.

The device may be used only in compliance with the limits stated as technical operating spec

-

ifications. These can be found in 

Chap. 10, »Technical Data«

.

Intended use also includes following the instructions in this manual and complying with all 

relevant local regulations.

The 

ADICOS M-BUSMASTER XF

 may not be used for any other purpose. If the device is used 

in any other way, or if changes are made to the product, including in the course of installation 

and maintenance, the warranty claim is no longer valid.

2.6  Unintended Use

The 

ADICOS M-BUSMASTER XF

 may not be installed in potentially explosive areas.

2.7  Standards and Regulations

The safety and accident prevention regulations relevant to the specific application must be 

complied with when installing, starting up, servicing and inspecting the device.

The following standards and guidelines are particularly relevant:

Summary of Contents for M-BUSMASTER XF






























Reviews: